Bộ chuyển đổi USB sang CAN ICP DAS I-7565-G CR
CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface by the MS-Windows 98, Me, 2000, XP, Win 7 and Win 10 operating systems. If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).
The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface

3000V isolation on CAN side
Watchdog inside
Power and Error indicator display
Applications

- Factory Automation
- Building Automation
- Home Automation
- Control System
- Monitor System
- Vehicle Automation
Features
- Fully compliant with USB 1.1/2.0(Full Speed)
- Fully compatible with the ISO 11898-2 standard
- No external power supply is required as I-7565 takes it’s power from the USB bus
- Transmission speed up to 1M bps for CAN and 921.6K bps for USB
- Support both CAN 2.0A and CAN 2.0B
- Built-in jumper to select 120 ohm terminal resister
- Power, data flow and error indicator for CAN and USB
- 1000 frames in CAN received buffer
- Watchdog inside
- Windows 98/ME/2000/XP/Vista/Win 7/Win 10 and Linux drivers support
- Able to configure the CAN baud rate for each channel using a rotary switch
- Extends the CAN transmission distance
Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7565.
Utility
-
CAN bus Baud rate configuration
-
CAN acceptance filter configuration
-
CAN2.0A or 2.0B specific selection
-
Checksum and Error Response settings
-
Easy test to transmit/receive CAN messages
CAN Monitor & Datalog tool
-
It has a CAN message field which can display the receiving CAN messages in Decimal or HEX mode
-
Can display the timestamp of each received CAN message
-
Users can change the display mode, up-down, down-up or stop
-
It can count the number of received CAN messages
-
Data Log : It can save the CAN message as “ txt ” file
-
Has CAN ID filter function
-
Can send CAN message to CAN BUS according the defined interval time

Specifications
| LED Indicators | |
|---|---|
| Status | 1 x Power 1 x CAN status |
| USB | |
|---|---|
| Specification | USB 1.1 and 2.0 standard |
| Connector | 1 x USB (Type B) |
| Driver | Windows 2000/XP//7 |
| Receive Buffer | 900 data frames |
| CAN | |
|---|---|
| Ports | 1 |
| Baud Rate | 10 k ~ 1 M bps |
| Isolation | 3000 Vrms on the CAN side |
| Terminal Resistor | Selectable 120 Ω terminal resistor by jumper |
| Specification | CAN 2.0A/2.0B |
| Filter | Yes |
| Receive Buffer | 1000 data frames |
| Power | |
|---|---|
| Input Range | USB power delivery |
| Consumption | 1.5 W |
| Mechanical | |
|---|---|
| Casing | Plastic |
| Dimensions (mm) | 72 x 112 x 33 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Ordering Information
| I-7565-G CR | Intelligent USB to CAN converter (Plastic Case) (RoHS) Includes CA-USB18(1.8M Cable). |
