Modem ZigBee+CDMA IP Four-Faith F8214

Mã: F8214 Danh mục: Modem/Terminal/Module Zigbee, Thiết bị truyền thông không dây M2M

Vendor: Four-Faith

Feature

● Support data transfer by cellular and ZigBee network
● Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function
● TTL logic level RS232 interface can be customized
● Support APN/VPDN
● Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters
● Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
● Support hardware and software WDT
● Provide management software for remote management
● Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest

F8214 ZigBee+CDMA IP MODEM
F8214 ZigBee+CDMA IP MODEM is a kind of data terminal device that provides data transfer function by public CDMA and ZigBee network.It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

Environmental Adaptability
Designed for harsh and unattended environment

Powerful network conversion capability
ZigBee to TCP/IP protocol (4G/3G/2.5G network) implement two kinds of network communication agreement

ModbusIntegrated Modbus standard protocol
Remote PC can collect and transfer the data by 4G/3G/2.5G and ZigBee network.

Simultaneous transmission of multiple data centers
Support multiple data transmission and multi-data center backup center synchronous transmission (five data centers), applicable to rapid or large transmission of information

Reliable networking and transparent data communication
Using high-performance industrial grade wireless modulehigh stability and high precision industrial grade components, a very wide temperature design, easy to adapt to cold temperature working environment that supports transparent data transmission, can adapt to any standard or non-standard user protocol.。

WDT watchdog
Running protection system management and effective monitoring to ensure system stability.

Rich interfaces, convenient for customers to use
Provide 5 x I/O, can achieve 5 digital input and output; Compatible with 3 pulse outputs, 3 analog inputs, 2 pulse counting function. Provide a standard RS232, RS485 interface for direct connection of serial devices.

Specification

Cellular Specification

Item	Content
Cellular Module	Industrial cellular module
Standard and Band	CDMA2000 1xRTT 800MHz, 800/1900MHz(optional),450MHz(optional)
Bandwidth	153.6Kbps
TX power	<30dBm
RX sensitivity	<-104dBm

ZigBee Specification

Item	Content
ZigBee Module	Industrial ZigBee module
Standard and Band	IEEE 802.15.4 ISM 2.4 GHz
Indoor/Urban Range	60m 90m(for enhanced version)
Outdoor/RF Line-of-Sight Range	1200m 3200m(for enhanced version)
Transmit Power	3.1 mw (+5dBm) /Normal mode, 6.3 mw (+8dBm)/Boost mode 63 mw (+18dBm) (for enhanced version)
Bandwidth	250Kbps
Receiver Sensitivity	-102dBm
Network Topologies	Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh
Number of channels	16 Direct Sequence Channels 15 Direct Sequence Channels (for enhanced version)
Channels	11 to 26 11 to 25 (for enhanced version)

Hardware System

Item	Content
CPU	Industrial 32 bits CPU
FLASH	512KB (Extendable)
SRAM	256KB(Extendable)

Interface Type

Item	Content
Serial	1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps
Indicator	“Power”, “ACT”, “Online”, “ZigBee”
Antenna	Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) ZigBee: Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM	Standard 3V/1.8V user card interface, 15KV ESD protection
Power	Terminal block interface, reverse-voltage and overvoltage protection

Power Input

Item	Content
Standard Power	DC 12V/0.5A
Power Range	DC 5~35V

Power Consumption

Working States	Power Consumption
Communication	50-85mA@12VDC；115-160mA@5VDC
Standby	25mA@12VDC；45mA@5VDC
Sleep	8mA@12VDC；18mA@5VDC
Timing Power Off	0.6mA@12VDC；1mA@5VDC

Physical Characteristics

Item	Content
Housing	Iron, providing IP30 protection
Dimensions	91×58.5×22 mm
Weight	210g

Environmental Limits

Item	Content
Operating Temperature	-25~+65ºC (-13~+149℉)
Extended Operating Temperature	-30~+75ºC (-22~+167℉)
Storage Temperature	-40~+85ºC (-40~+185℉)
Operating Humidity	95% ( unfreezing)

Datasheet

Manual

Software