Gateway công nghiệp giao thức Modbus RTU、Modbus TCP、PPI、BACnet、DNP3 kết nối LTE (4G) + Wifi+ I/O(2 DI, 1 DO, 1 Relay) Four-Faith F-G100-L

F-G100-L Cellular (LTE), WIFI, SIM*1, I/O(2*DI, 1*DO, 1*Relay.)

Vendor:

Features

Support multiple WAN connections, including static IP,DHCP，PPPOE，3G/UMTS/4G/LTE，dhcp-4G
Support 3G/4G and wired WAN dual link intelligent switching backup function (optional)
WIFI support 802.11b/g/n/ac, support WIFI AP, Client, repeater, relay bridge and other working modes (optional)
Support multi-channel DHCP server and DHCP client, DHCP bundled MAC address, DDNS,firewall, NAT, DMZ host, QoS, traffic statistics, real-time display data transmission rate
Connect to the four letter cloud service, access the cloud platform through the web, and realize remote management
Maintenance channel: After the maintenance personnel run the client on the portable PC, they can directly maintain the field device remotely
Local storage support flash memory, TF card (select one for TF card and USB application)

Support Various Communication Protocols:
Modbus RTU、Modbus TCP、PPI、BACnet、DNP3.0etc. intelligent gateway

Support Popular Cloud Servers,Customizable Development:

Microsoft Azure-iot，AWS，Ali,Based on Linux,easy to develop etc.

Support Various Interfaces
RS232/RS485/RJ45/DI/D0,etc. iot edge gateway

Industrial Level Design
Freeze & Heat Resistance，EMC4，Reliable

industrial iot gateways

Low Maintenance Cost:
Connect to Four-faith Cloud，Support Remote Management
iot edge gateway

Specification

Wireless Parameters

Project	Content
Wireless Module	Industrial Wireless Module
Standard and Frequency	FDD LTE：Band 1/3 ，Band 2/4/5/13/17/25（optional） CDMA 1XRTT/EVDO 800/1900MHz Full Band(optional)：TDD-LTE、FDD-LTE、EVDO、WCDMA、TD-SCDMA、CDMA1X、GPRS/EDGE
Bandwidth	FDD LTE： Cat-12(DL 600Mbps，UL 150Mbps) Cat-6(DL 300Mbps，UL 50Mbps) Cat-4(DL 150Mbps，UL 50Mbps) TDD LTE: (DL 61Mbps，UL 18Mbps) CDMA2000 1X EVDO Rev A (DL 3.1Mbps，UL 1.8Mbps) WCDMA:(DL 42Mbps，UL 5.76Mbps) TD-SCDMA:(DL 4.2Mbps，UL 2.2Mbps)
Transmit power	<23dBm
Receiving	<-93.3dBm

WIFI Parameters

Project	Content
Standard	IEEE802.11b/g/n，2.4G, 22 MIMO， AP mode IEEE802.11ac，5.8G, 22 MIMO， AP mode
Bandwidth	IEEE802.11b/g： 108Mbps IEEE802.11n：300Mbps IEEE802.11ac： 780Mbps
Security	WEP、WPA、WPA2
Transmit power	26dBm（11b），21.5dBm（11g），20dBm（11n），16dBm（11ac）
Receiving	<-72dBm@54Mpbs

Hardware

Interface

Project	Content
WAN	1 x 10/100/1000M Ethernet（RJ45 ），Adaptive MDI/MDIX, Built in1.5KV Electromagnetic isolation protection
LAN	4 x 10/100/1000M Ethernet（RJ45 ），Adaptive MDI/MDIX， Built in1.5KV Electromagnetic isolation protection
Serial	1 x RS232 serial，5 x RS485 serial ， Built in15KV ESD Protection，parameters： Data bit：5、6、7、8 Stop bit：1、1.5(optional)、2 Calibration: no parity, even parity, odd parity, SPACE (optional) and MARK verification (optional) Baudrate：2400~115200bits/s
Indicator	“PWR”, “SYS”, “WIFI”, “SIM”, “Online”,”Signal Strength”
I/O	6-pin 3.5 mm terminal block; 2 inputs, 1 output, 1 relay input high: 5 to 30 VDC Input low level: 0 to 3 VDC Load current < 50mA @ 30VDC Relay load: 1A 250VAC/30VDC
Antenna	Cellular: 2 standard SMA female antenna interfaces with characteristic impedance 50 ohms WIFI: 2 standard SMA male antenna interfaces, characteristic impedance 50 ohms
SIM/UIM	Standard drawer user card interface, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection
Power	2-pin terminal power socket with built-in power supply reverse protection
USB	USB3.0
TF card	Standard bullet TF card interface supports various TF card phase protection
Reset button	This button restores the parameter configuration of the intelligent gateway to the factory default value.

Power

Physical characteristics

Project	Content
Casing	Metal casing，Protection rate IP30
Size	172x122x38 mm
Weight	700g

Others

Order information

Model	Content
F-G100-FL	Cellular (LTE/WCDMA), WIFI, SIM1, I/O(2DI,1DO,1Relay.)