EtherCAT Master 13 kênh vào/ra số + 1 kênh Encoder 2 trục ICP DAS ECAT-M801
EtherCAT (Ethernet for Control Automation Technology) is an open, high-performance fieldbus system that makes Ethernet technologies
available at the I/O level. EtherCAT provides flexible wiring, fast communication and many other nice features. It needs a master to control many slaves. ICP DAS provides PC master cards for users to build their motion related applications. This card can offer multi-axis motion and I/O control functions by its own built-in CPU. In this way, the CPU loading of PC can be reduced dramatically. In the mean while, ICP DAS also provides many I/O slave modules for users to choose from. Since EtherCAT technology is an industrial standard, those modules can work together in a system with 3rd-party EtherCAT slaves as well
Applications

Features
- Up to 32-axis motion control
- Up to 64 slaves
- Slave operation (SDO, PDO)
- Axis homing
- Single-axis position and velocity control
- Synchronized motion (E-GEAR, E-CAM)
- Virtual axes
- Multi-group motion control
- Multi-axis linear interpolation
- 2D/3D circular interpolation
- Helical interpolation
- On board 13 DI and 13 DO
- On board 2 encoder interfaces with compare trigger output
- API for CiA402 servo drives and ICP DAS stepper motor control modules
- API for ICP DAS DI/DO and AI/AO modules
- Hardware emergency stop
Hardware Specifications
| Communication | ||
| Ethernet Port | 1 x RJ-45, 100 BASE-TX | |
| Protocol | EtherCAT | |
| Data Transfer Medium | Ethernet/EtherCAT Cable (Min. CAT 5), Shielded | |
| No. of Slave Node | Max. 64 | |
| No. of Motion Control | Max. 32-Axis Synchronously | |
| General | ||
| Bus Type | PCI Express x1 | |
| Connector | RJ45 x1 DB-26 (Female) DB-15 (Female) |
|
| Operating Temperature | 0℃~+60℃ | |
| Storage Temperature | -20℃~+70℃ | |
| Humidity | 0~90% RH, non-condensing | |
| Dimensions (L x W x D) | 192mm x 135mm x 21.5mm | |
| Digital Output | ||
| Channels | 13 | |
| Type | Sink (open collector) | |
| Load Voltage | +24 V | |
| Max. Load Current | 100 mA/ch | |
| Isolation Voltage | 3000 Vrms | |
| Digital Input | ||
| Channels | 13 | |
| Type | Wet (Sink/Source) | |
| On Voltage Level | +19 V ~ + 24 V | |
| Off Voltage Level | +11 V Max. | |
| Isolation Voltage | 3000 V | |
| Encoder | ||
| Axis | 2 | |
| Type | Quadrant, CW/CCW, Pulse/Dir. | |
| Speed, Resolution | 1 MHz, 32-bit | |
| Compare Trigger Output | 2-ch | |
Ordering Information
|
ECAT-M801
|
EtherCAT Master, 13-channel digital I/O, 2-axis encoder interface |
|
ECAT-M801/S
|
EtherCAT Master, 13-channel digital I/O, 2-axis encoder interface Including a DN-26, a CA-1515M and a CA-2615M |
Accessories
|
DN-26
|
15-pin and 26-pin Din-Rail mounting I/O connector board |
|
CA-1515M
|
DB-15 Male (D-sub) to DB-15 Male (D-sub) cable. 1.5 M (180°) |
|
CA-2615M
|
DB-26 Male (D-sub) to DB-26 Male (D-sub) cable. 1.5 M (180°) |
