Transducer 8 kênh đo điện áp 150 VDC ICP DAS DN-848VI-150V
Features
- AC/DC Source Input
- High Voltage Input Measurement
- Linear Attenuation Ratio
- High Input Impedance
- Channel to Channel Isolation for DN-848VI-10V,
DN-848VI-80V, DN-848VI-150V and DN-843VI-600V - Channel to Channel Isolation for DN-848VI-10V,
DN-848VI-80V and DN-848VI-150V - 4 kV ESD Protection
- 3 kV Surge Protection
- RoHS Compliance
- Operating Temperature: -25 °C ~ +75 °C
- Easily wire connection
Introduction
The DN-800V series are voltage input attenuator. The maximum input range is from ±80 V to +/- 600 V and can be attenuated to ±10 V. The “I” version provide 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high voltage.
Application
Specification
| Models | DN-848VI-10V | DN-848VI-80V | DN-848VI-150V | DN-8“““`43VI-600V | DN-843V-600V |
| General | |||||
| Channel | 8 | 8 | 8 | 3 | 3 |
| Input Type | AC/DC Voltage | ||||
| Input Range | +/- 10 Vpp | +/- 80 Vpp | +/- 150 Vpp | +/- 600 Vpp | +/- 600 Vpp |
| Output Range | +/- 10 Vpp | ||||
| Accuracy | 1% of FSR | ||||
| Chanel to Channel Isolation | Yes, 3000 VDC | – | |||
| Bandwidth | 30 KHz | 100 KHz | |||
| Input Impedance | > 1 MΩ | ||||
| Intra-module Isolation, Input to Output | 3000 VDC | – | |||
| EMS Protection | |||||
| ESD (IEC 61000-4-2) | +/- 4 kV contact for power line, input and output channels , +/- 8 kV air for random point | ||||
| Surge (IEC 61000-4-5) | +/- 3 kV for power liner | ||||
| Power Input | |||||
| Input Range | +10 ~ +24 VDC | ||||
| Power Consumption | 9.2 W | 9.2 W | 9.2 W | 3.84 W | 0.56 W |
| Mechanical | |||||
| Dimensions (W x L x H) | 122 mm x 174 mm x 33 mm | 122 mm x 174 mm x 24.5 mm | |||
| Installation | DIN-Rail Mounting | ||||
| Environment | |||||
| Operating Temperature | -25 ~ +75 °C | ||||
| Storage Temperature | -30 ~ +75 °C | ||||
| Humidity | 10 ~ 90% RH, Non-condensing | ||||
Download
Ordering Information
| DN-848VI-10V CR | 8-channel 10 VDC Voltage Attenuator with channel to channel isolation (RoHS) |
| DN-848VI-80V CR | 8-channel 80 VDC Voltage Attenuator with channel to channel isolation (RoHS) |
| DN-848VI-150V CR | 8-channel 150 VDC Voltage Attenuator with channel to channel isolation (RoHS) |
| DN-843V-600V CR | 3-channel 600 VDC Voltage Attenuator with non-isolation (RoHS) |
| DN-843VI-600V CR | 3-channel 600 VDC Voltage Attenuator with channel to channel isolation (RoHS) |