Bộ đo và lưu trữ CO, nhiệt độ, độ ẩm, điểm sương kết nối RS-485, Ethernet, Wi-Fi, Modbus, MQTT ICP DAS CL-201-WF CR
Features
- Able to record CO, Temperature, Humidity and Dew Point Measurements
- Up to 450,000 records with date and time stamps
- Simple and Powerful Software Utility, iOS APP and Android App Included
- Supports the DCON and Modbus RTU/TCP Protocols
- Supports the MQTT Protocol for Ethernet Interface
- Includes RS-485/Ethernet/Wi-Fi Communication Interfaces
- Relay Output for Alarm or IAQ Device Control
- Compatible with IEEE802.11b/g/n standards
- Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
- Support Infrastructure and Limit-AP Modes for Wireless Networks
- Ceiling Mounting or Wall Mounting
Introduction
Support is provided for popular industrial protocols such as DCON, Modbus RTU, and Modbus TCP. For Ethernet interface, it also supports the emerging machine-to-machine (M2M)/)IoT (Internet of Things) connectivity protocol – MQTT. The CL-200-WF Data Logger can be connected via widely used communication interfaces including RS-485, Ethernet, PoE and Wi-Fi, meaning that the device can be easily integrated into existing HMI or SCADA systems, and is easily maintained in a distributed control system.
The MQTT protocol is designed for the efficient exchange of realtime data between a sensor and a mobile device. It operates via TCP/IP and is in widest use today in “machine-to-machine” (M2M) and “Internet of Things” applications.
Get Real-time Data Anywhere and Anytime
Real-time data from the CL-200-WF data logger can be accessed from anywhere and at any time using the DL300 Utility, the iOS or Android App, or via a regular web browser, as long as they are connected to the same local network as the data logger.
Simple and Powerful CL-200-WF Utility
The DL300 Utility can be used to configure the modules, monitor real-time data, group CL-200-WF modules so that the status of distribution groups can be viewed and managed. The utility also allows the log data to be downloaded and exported to a .CSV file that can then be imported into any industry-standard software or spread sheet for analysis.
Real-time data from the CL-200-WF series can be accessed from anywhere and at any time using the WF-IIOT-Utility and iOS App.
Applications
- Transportation of Food or Pharmaceuticals
- Food and Beverage Industry (HACCP)
- Blood Stations and Pharmacies
- Building and Energy Management
- Warehouse Management
- Museums, Archives and Galleries
The HCHO/VOC detector provides an instantaneously warning of toxic formaldehyde, which can be found in a plywood factory, furniture factory and new interior remodelling house commonly.
Indoor or Underground Parking Lot Automatic Monitoring Solution
The air quality automation system for indoor or underground parking lot can use the CL-200-WF series modules to monitor the health and safety information, such as CO, CO2, temperature, humidity and dew point, and more.
Specifications
CPU Module | |
---|---|
Watchdog Timer | Yes, Module (2.3 seconds), Communication (Programmable) |
Temperature Measurement | |
---|---|
Range | -10 ~ +50°C |
Resolution | 0.1°C |
Accuracy | ±0.6°C |
Humidity Measurement | |
---|---|
Range | 0 ~ 100% RH, Non-condensing |
Resolution | 0.1% RH, Non-condensing |
Accuracy | ±5% RH, Non-condensing |
CO Measurement | |
---|---|
Range | 0 to 1000 ppm (Electrochemical) |
Resolution | 1 ppm |
Accuracy | ±5% of measured value |
Response Time | 30 seconds |
Warm-up Time | 5 minutes |
System | |
---|---|
Security | IP filter (whitelist) and Password (web) |
Alarm | CO/RH/Temperature |
Real Time Clock | Yes |
Data Logger | Yes, up to 450,000 records |
Wi-Fi | |
---|---|
Transmission Distance (LoS) | 50 meters (LOS) |
Standard Supported | IEEE 802.11 b/g/n |
RX Sensitivity | -95.7 dBm @ 1 DSSS, -74.0 dBm @ 54 OFDM |
Output Power | 18 dBm @ 1 DSSS, 14.5 dBm @ 54 OFDM |
Mode | Infrastructure & Limited AP |
Encryption | WEP, WPA and WPA2 |
Antenna | 1 dBi (PCB Antenna) |
Relay Output | |
---|---|
Channels | 1 x Form A, SPST 30 VDC @ 16 A or 250 VAC @ 16 A |
COM Ports | |
---|---|
Ports | 1 x RS-485 1 x Ethernet |
Baud Rate | 1200 ~ 115200 bps |
Protocol | DCON and Modbus/RTU (RS-485) Modbus TCP (Ethernet, Wi-Fi) MQTT (Ethernet) |
Ethernet | |
---|---|
Ports | 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators) |
Power | |
---|---|
Consumption | Non-PoE: 1.6 W (Max.) PoE: 1.7 W (Max.) |
Powered from Terminal Block | +12 ~ +48 VDC |
Mechanical | |
---|---|
Dimensions (mm) | Ø 150 x 53 (Ø x H) |
Installation | Ceiling Mounting/Wall Mounting |
Ingress Protection Rating | IP20 |
Environment | |
---|---|
Operating Temperature | 0 ~ 50°C |
Storage Temperature | -30 ~ +75°C |
Humidity | 10 ~ 90% RH, Non-condensing |
Ordering information
CL-201-WF CR | CO/Temperature/Humidity/Dew Point Data Logger Module (RS-485, Ethernet PoE, Wi-Fi) (RoHS) |