Module DeviceNet Slave 8 kênh đầu vào tương tự (AI) ICP DAS CAN-2017D
DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc. The CAN-2017D follows DeviceNet specification Volume I/II, Release 2.0. User can access the analog input status and set the configuration via DeviceNet EDS file. CAN-2017D has 8-channel analog input and it can be used to various applications. By the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements. For more information about the DeviceNet master interfaces and other DeviceNet products, please refer to the following web site.
Applications

We have communicated with the following DeviceNet masters or gateways.
- Allen-Bradley(AB) 193-DNENCAT, 193-DNENCATR
- OMRON CJ1W-DRM21
- OMRON CS1W-DRM21-V1
- OMRON C200HW-DRM21-V1
- OMRON 3G8F7-DRM21-E
Hardware Specifications
| DeviceNet Interface | |
| DeviceNet Specification | Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5 |
| DeviceNet subscribe | Group 2 Only Server |
| Connection supported | 1 connection for Explicit Messaging 1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
| Node ID | 0~63 selected by rotary switch |
| Baud Rate (bps) | 125 kbps, 250 kbps, 500 kbps |
| Terminator Resistor | Switch for 120 Ω terminator resistor |
| Connector | 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
| EDS file | Yes |
| Analog Input | |
| Channels | 8 |
| Input Type | ±10V, ±5V, ±1V, ±500mV, ±150mV, ±20mA,( External 125 Ohm Resistor Required) |
| Resolution | 16-bit |
| Sampling Rate | 10 Samples/Sec. (Total) |
| Accuracy | ±0.1% FSR |
| Zero Drift | ±10 μV/ °C |
| Span Drift | ±25 ppm/ °C |
| Common Mode Rejection | 86 dB |
| Normal Mode Rejection | 100 dB |
| Input Impedance | >2 MΩ |
| Individual Channel Configuration | Yes |
| Over voltage Protection | 240 Vrms |
| ESD Protection | ±4kV, Contact for each terminal |
| Intra-module Isolation, Field to Logic | 3000 VDC |
| LED | |
| Status LED | PWR LED, NET LED, MOD LED |
| Terminal Resister LED | 1 LED as terminal resister Indicator |
| Alarm LED | 8 LEDs as over Upper Limit Indicators 8 LEDs as under the Lower Limit Indicators |
| Power | |
| Power Supply | Unregulated +10 ~ +30 VDC |
| Power Consumption | 2.0 W |
| Mechanism | |
| Installation | DIN-Rail |
| Dimensions | 33 mm x 99 mm x 78 mm ( W x L x H ) |
| Environment | |
| Operating Temp. | -25 ~ 75 ℃ |
| Storage Temp. | -30 ~ 80 ℃ |
| Humidity | 10 ~ 90% RH, non-condensing |
Ordering Infomation
|
CAN-2017D
|
DeviceNet Slave Module of 8-channel Differential Analog Input |
Related Products
| DeivceNet Master Library | Support PISO-CAN serials, PEX-CAN serials and PCM-CAN with DeviceNet master library |
| PISO-DNM100U-D PISO-DNM100U-T |
1 Port Intelligent DeviceNet Master Communication Board with DeviceNet Firmware Inside for universal PCI bus |
| I-7565-DNM-G CR | USB/DeviceNet Master communication Converter with D-sub 9-pin connector |
| I-8124W | 1 Port DeviceNet Master Module with dual port RAM |
| I-87124 | 1 Port High Performance DeviceNet Master Module |
| CA-0910-C | 9-pin Female D-sub & 3-wire CAN bus cable (1M) |
