Module CANopen Slave 8 kênh đầu vào tương tự (AI) ICP DAS CAN-2017C
CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network system, such as industrial machine control , vehicle control system, factory automation, medical equipment control, remote data acquisition, environmental monitoring, and packaging machines control, etc.
The CAN-2017C module follows the CiA DS-301 version 4.02 and DSP-401 version 2.1. It is easy to access the differential analog input status and set the configuration by using the standard CANopen protocol. The CAN-2017C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, the provided EDS file is standard for any other standard CANopen masters. By using the 8-channel analog input and the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements.
Applications

Hardware Specifications
|
CANopen Interface
|
|
|
NMT
|
Slave
|
|
Error Control
|
Node Guarding protocol / Heartbeat Producer
|
|
No. of PDOs
|
10Rx , 10Tx
|
|
PDO Modes
|
Event Triggered, Remotely requested, Cyclic and acyclic SYNC
|
|
PDO Mapping
|
Available
|
|
No. of SDOs
|
1 server, 0 client
|
|
Emergency Message
|
Yes
|
|
CANopen Version
|
DS-301 v4.02
|
|
Device Profile
|
DSP-401 v2.1
|
|
Specification
|
ISO-11898-2, CAN 2.0A
|
|
Baud Rate (bps)
Setting by Rotary Switch |
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, and 1 M
|
|
Node ID
Setting by Rotary Switch |
1 ~ 99
|
|
Terminator Resistor
|
Switch for 120 Ω terminator resistor
|
|
Connector
|
5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
|
|
EDS file
|
Yes
|
|
Analog Input
|
|
|
Channels
|
8
|
|
Input Type
|
±10V, ±5V, ±1V, ±500mV, ±150mV, -20mA ~ +20mA (Requires Optional External 125 Ω Resistor)
|
|
Resolution
|
16-bit
|
|
Sampling Rate
|
10 Samples/Sec. (Total)
|
|
Accuracy
|
+/-0.1% FSR
|
|
Zero Drift
|
+/- 10 μV/ °C
|
|
Span Drift
|
+/- 25 ppm/ °C
|
|
Common Mode Rejection
|
86 dB
|
|
Normal Mode Rejection
|
100 dB
|
|
Input Impedance
|
>2 MΩ
|
|
Individual Channel Configuration
|
Yes
|
|
Over voltage Protection
|
240 Vrms
|
|
ESD Protection
|
+/-4kV, Contact for each terminal.
|
|
Intra-module Isolation, Field to Logic
|
3000 VDC
|
|
LED
|
|
|
Power
|
PWR, red
|
|
CANopen Status
|
RUN/ERR, green/orange
|
|
Upper/Lower Limit Alarm
|
green
|
|
Power
|
|
|
Power Supply
|
Unregulated +10 ~ +30 VDC
|
|
Power Consumption
|
2.0 W
|
|
Mechanism
|
|
|
Installation
|
DIN-Rail
|
|
Dimensions
|
33 mm x 99 mm x 78 mm ( W x L x H )
|
|
Environment
|
|
|
Operating Temp.
|
-25 ~ 75 ℃
|
|
Storage Temp.
|
-30 ~ 80 ℃
|
|
Humidity
|
10 ~ 90% RH, non-condensing
|
Ordering Infomation
|
CAN-2017C
|
CANopen slave module of 8-channel analog inputs |
Related Products
| PISO-CAN200/200U | 2-Port Isolated Protection CAN Communication Board |
| PISO-CAN400/400U | 4-Port Isolated Protection CAN Communication Board |
| PEX-CAN200i (PISO-CAN200E) |
PCI Express CAN Communication Card |
| PISO-CM100U | One Standalone Intelligent CAN Communication Card |
| PISO-CPM100U | One Standalone Intelligent CANopen Communication Card |
| I-7565-CPM | USB/CANopen Master Converter Module |
| I-8123W | 1 Port High Performance CANopen Master Slot Module |
| I-87123 | 1 Port CANopen Master Slot Module |
