Module Zigbee I/O (Pair-connection) 4 kênh đầu vào số + 4 kênh đầu ra Relay ICP DAS ZT-2060-IOP
Features
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4 / ZigBee Specifications
- Wireless Transmission Range up to 700 m (Default)
- Adjustable RF Transmission Output Power
- Automatic 4 Channels Pair-connection of the Digital Input and Relay Output
- DO Safe Value setting for Wireless Disconnection Monitoring
- Configurable I/O Pairing Number
- Surge and ESD Protection
- Supports AES-128 Encryption for the Wireless Communication
- DIN-Rail Mountable
Introduction
The ZT-2060-IOP module is a ZigBee coordinator that provides both 4-channel digital input and 4-channel digital output. An embedded I/O channel binding function means that there is no need to use an external controller.
The status of each channel is bound to a remote channel of the ZT-2060. The ZT-2060-IOP continually updates the status of the DO channel of the remote ZT-2060 based on its own DI channels. It also reads the status of the DI channel of the remote ZT-2060 to synchronize its own DO channels.
The ZT-2060-IOP also provides external DIP switches for easy Configuration, which can be used to synchronize the digital signals in any difficult wiring environment.
Application

I/O Specification
| Digital Input | ||
| Input Channels | 4 | |
| Input Types | Isolated, Wet Contact (Sink/Source) | |
| Input Level | On Voltage Level | +3.5 VDC ~ +30 VDC |
| Off Voltage Level | Max. +1 VDC | |
| Input Impedance | 3 kΩ, 0.33 W | |
| Relay Output | ||
| Output Channels | 4 | |
| Output Types | Power Relay, Form A | |
| Contact Rating | 5 A @ (250 VAC/30 VDC) | |
| Max. Contact Voltage | 270 VAC/125 VDC | |
| Operate Time | Max. 10 ms at Rated Voltage | |
| Release Time | Max. 5 ms at Rated Voltage | |
| Mechanical Endurance | At No Load: 20,000,000 ops. min. (300 ops/minute) | |
| Electrical Endurance | Resistive Load: 100,000 ops. min. (10 ops/minute) | |
| Dielectric Strength | Between Contacts | 750 VAC for 1 minute |
| Between Coil to Contacts | 3,000 VAC for 1 minute | |
| Insulation Resistance | 5,080 V (1.2/50 μs) | |
| Surge Strength | Max. 5 ms at Rated Voltage | |
| ESD Protection | +/-4 kV contact for each channel | |
System Specification
| Communication Interface | ||
| Wireless Standards | ZigBee 2007 Pro | |
| Transmission Power | 11 dBm (FCC Certificated) | |
| 2.4 GHz Antenna | 5 dBi Omni directional | |
| Transmission Range (LoS) | 700 m (Typical) | |
| Certification | CE/FCC, FCC ID | |
| Max. Slaves in a ZigBee Network | 255 | |
| LED Indicators | ||
| Power | 1 LED, Red | |
| ZigBee Communication | 1 LED, Green | |
| Digital Input and Output | 4 Green LEDs for Digital Input 4 Red LEDs for Relay Output |
|
| Isolation | ||
| Intra-module Isolated, Field-to-Logic |
2500 VDC | |
| EMS Protection | ||
| ESD (IEC 61000-4-2) | 4 kV Contact for Power Line, Communication Line and each Channel, 8 kV Air for Random Point |
|
| EFT (IEC 61000-4-4) | 4 kV for Power Line | |
| Power | ||
| Input Voltage Range | +10 VDC ~ +30 VDC | |
| Power Consumption | Max. 1.4 W | |
| Mechanical | ||
| Flammability | Fire Retardant Materials (UL 94V-0 Level) | |
| Dimensions (L x W x H) | 94 mm x 33 mm x 110 mm | |
| Installation | DIN-Rail | |
| Environment | ||
| Operating Temperature | -25 ~ +75°C | |
| Storage Temperature | -30 ~ +80°C | |
| Relative Humidity | 10 ~ 90% RH, Non-condensing | |
Ordering information
| ZT-2060-IOP CR | ZigBee I/O Pair-connection Module with the 4-channel Isolated Digital Input and 4-channel Relay Output (Host, ZigBee Coordinator) (RoHS) |
| ZT-2042 CR | ZigBee 4-ch PhotoMOS Relay Output and 4-ch Open Collector Output Module (Slave, ZigBee Router) (RoHS) |
| ZT-2043 CR | ZigBee 14-ch Isolated Digital Output Module (Slave, ZigBee Router) (RoHS) |
| ZT-2055 CR | ZigBee 8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module (Slave, ZigBee Router) (RoHS) |
| ZT-2060 CR | ZigBee 6-ch Isolated Digital Input and 4-ch Relay Output Module (Slave, ZigBee Router) (RoHS) |
| Important Note: ZigBee Pair-connection module is a ZigBee host to coordinate the ZigBee I/O module. Please order at least one ZT-2000 digital series module to work for ZigBee I/O pairing. | |
