Card PCI 144 kênh DIO board ICP DAS PIO-D144U
Features
- Support the +3.3/+5 V PCI bus for PIO- D144U/D144LU
- Support PCI Express x1 for PEX-D144LS
- 144 channels of digital I/O
- Bi-direction programmable I/O ports under software control
- Eighteen 8-bit bi-direction I/O ports
- Pull-high/Pull-low Jumpers for DI Channels for PIO-D144LU/PEX-D144LS
- Supports Card ID (SMD Switch)
- Interrupt source: 4-channel
- Output status readback
- Connect directly to DB-24P,DB-24R, DB-24PR, DB-24SSR, DB-24POR and other OPTO-22 compatible daughter board
Introduction
The PEX-D144LS card is the new generation product that ICP DAS provides to meet RoHS compliance requirement.
The PIO-D144U/D144LU universal PCI card supports 3.3 V/5 V PCI bus, while the PEX-D144LS supports PCI Express bus. These cards provide 144 TTL digital I/O lines that are grouped into eighteen 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs Ports on power-up or after a reset.
The PIO-D144U/D144LU provides six connectors for I/O wiring, while the PEX-D144LS provides a high-density connector that reduces the amount of installation space required for the card in the computer.
The PIO-D144U/D144LU and PEX-D144LS cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The PIO-D144LU and PEX-D144LS also adds pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.
The PIO-D144U/D144LU and PEX-D144LS cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The PIO-D144LU and PEX-D144LS also adds pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.
|
Comparison Table
|
||||
| Model |
Interface
|
DI Pull-High/Low
|
Compatibility
|
Advantage
|
| PEX-D144LS |
PCI Express
|
|
5 V/CMOS
|
Low power consumption、Low temperature
|
| PIO-D144LU |
Universal PCI
|
|
5 V/CMOS
|
Low power consumption、Low temperature
|
| PIO-D144U |
Universal PCI
|
|
5 V/TTL
|
High DO Driving (Output Capability)
|
Software
- DOS Lib and TC sample program (with source codes)
- DLL and OCX SDK for Windows 95/98/NT/2K.
- DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
- VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
- LabVIEW toolkit for Windows.
- Driver for Linux and DasyLab.
Specification
| Model Name | PEX-D144LS | PIO-D144LU | PIO-D144U |
| Programmable Digital I/O | |||
| Channels | 144 | ||
| Digital Input | |||
| Compatibility | 5 V/CMOS | 5 V/TTL | |
| Input Voltage | Logic 0: 0.8 V max. Logic 1: 2.0 V min. |
||
| Response Speed | 500 kHz | 1 MHz | |
| Digital Output | |||
| Compatibility | 5 V/CMOS | 5 V/TTL | |
| Output Voltage | Logic 0: 0.1 V max. Logic 1: 4.4 V min. |
Logic 0: 0.4 V max. Logic 1: 2.4 V min. |
|
| Output Capability | Sink: 6 mA @ 0.33 V Source: 6 mA @ 4.77 V |
Sink: 64 mA @ 0.8 V Source: 32 mA @ 2.0 V |
|
| Response Speed | 500 kHz | 1 MHz | |
| General | |||
| Bus Type | PCI Express x1 | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz | |
| Data Bus | 8-bit | ||
| Card ID | Yes(4-bit) | ||
| I/O Connector | Female SCSI II 100-pin x 1 50-pin box header x 1 |
Female DB37 x 1 50-pin box header x 5 |
|
| Dimensions (L x W x D) | 162 mm x 100 mm x 22 mm | 180 mm x 105 mm x 22 mm | |
| Power Consumption | 750 mA @ +3.3 V 0 mA @ +12 V |
250 mA @ +5 V | 600 mA @ +5 V |
| Operating Temperature | 0 ~ 60 °C | ||
| Storage Temperature | -20 ~ 70 °C | ||
| Humidity | 5 ~ 85% RH, non-condensing | ||
Ordering information
| PEX-D144LS CR | PCI Express, 144-channel DIO board (SCSI II Connector, RoHS) |
| PIO-D144U CR | Universal PCI, 144-channel DIO board (RoHS) |
| PIO-D144LU CR | Universal PCI, 144-channel DIO board (RoHS) |
Accessories
| CA-3710 | DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D | DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3715DM-H | DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
| CA-3730DM-H | DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-3750DM | DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
| CA-4002 | 37-pin Male D-sub connector with plastic cover. |
| CA-5002 | 50-pin flat cable 20 cm |
| CA-5015 | 50-pin flat cable 1.5 M |
| CA-SCSI100-15 | SCSI II 100-pin & 100-pin Male connector cable 1.5M |
| ADP-37/PCI | 50-pin connector extender to 37-pin connector |
| DB-24PD | 24-channel of isolated D/I board |
| DB-24RD | 24-channel of relay board |
| DB-24PRD | 24-channel of power relay board |
| DB-24POR | 24-channel of PhotoMos Relay output board |
| DB-24SSR | 24-channel of Solid State Relay output board |
| DB-24C | 24-channel of open-collector output board |
| DN-100 | I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector |
| DN-100-CA | I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector Include one CA-SCSI100-15 cable |

