Module DeviceNet Slave 8 kênh PWM + 8 kênh Bộ đếm tốc độ cao ICP DAS CAN-2088D
PWM (Pulse width modulation) is a powerful technique for controlling analog circuits. It uses digital outputs to generate a waveform with variant duty cycle and frequency to control analog circuits. CAN-2088D is a PWM slave module of DeviceNet protocol. It has 8 PWM output channels and 8 high speed counter channels. It can be used to develop powerful and cost effective analog control system.
Applications
-
Controlling the position/speed of motors
-
Dimming the brightness of lamps
-
Controlling the speed of fans
-
High speed counter


We have communicated with the following DeviceNet masters or gateways.
- Allen-Bradley(AB) 193-DNENCAT, 193-DNENCATR
- OMRON CJ1W-DRM21
- OMRON CS1W-DRM21-V1
- OMRON C200HW-DRM21-V1
- OMRON 3G8F7-DRM21-E
Hardware Specifications
|
DeviceNet Interface
|
|
|
DeviceNet Specification
|
Volume I, Release 2.0 & Volume II, Release 2.0, Errata5
|
|
DeviceNet subscribe
|
Group 2 Only Server
|
|
Connection supported
|
1 connection for Explicit Messaging
1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
|
Baud Rate Setting by Rotary Switch
|
125 kbps, 250 kbps, 500 kbps
|
|
Node ID Setting by Rotary Switch
|
0 ~ 63
|
|
Heartbeat message
|
Yes
|
|
Shutdown message
|
Yes
|
|
Terminator Resistor
|
Switch for 120 Ω terminator resistor
|
|
Connector
|
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
|
EDS file
|
Yes
|
|
LED
|
PWR/NET/MOD
|
|
PWM
|
|
|
Channels
|
8 (Source)
|
|
Output Max. Load Current
|
1 mA
|
|
Frequency
|
0.2 ~ 500 kHz (non-continuous)
|
|
Scaling Resolution
|
16-bit (1 ~ 128 μs for each step)
|
|
Duty Cycle
|
0.1 ~ 99.9 %
|
|
PWM Mode
|
Burst mode, Continuous mode
|
|
Burst mode counter
|
1~65535 counts
|
|
Trigger Mode
|
Hardware (Start and Stop) or Software (Start and Stop)
|
|
Intra-module Isolation
|
3750 Vrms
|
|
ESD Protection
|
4 kV Contact for each channel
|
|
Digital Input
|
|
|
Channels
|
8 (Sink/Source)
|
|
ON Voltage Level
|
+5.5 ~ +30 V
|
|
OFF Voltage Level
|
<3.5 V
|
|
Counter Frequency
|
500 kHz max.
|
|
Max. Counts
|
32-bits (4,294,967,295)
|
|
Input Impedance
|
4.7 kΩ, 1/4 W
|
|
Intra-module Isolation
|
3750 Vrms
|
|
ESD Protection
|
4 kV Contact for each channel
|
|
LED
|
|
|
DeviceNet Status
|
3 LEDs for PWR/NET/MOD
|
|
Terminal Resister
|
1 LED as Terminal Resister indicators
|
|
PWM LED
|
8 LEDs as PWM Output indicators
|
|
DI LED
|
8 LEDs as Digital Input indicators
|
|
Power
|
|
|
Power Supply
|
Unregulated +10 ~ +30 VDC
|
|
Power Consumption
|
2 W
|
|
Mechanism
|
|
|
Installation
|
DIN-Rail
|
|
Dimensions
|
32.3 mm x 99 mm x 77.5 mm ( W x L x H )
|
|
Environment
|
|
|
Operating Temp.
|
-25 ~ +75 ℃
|
|
Storage Temp.
|
-30 ~ +80 ℃
|
|
Humidity
|
10 ~ 90% RH, non-condensing
|
Ordering Infomation
|
CAN-2088D
|
DeviceNet module of 8-channel PWM and 8-channel High Speed Counter
|
Optional Accessories
|
DN-8P8C/S
|
8-channel Digital Output and 8-channel Counter Input Board, including DB-8820 Daughterboard and a CA-2520D Cable. |
Related Products
| DeivceNet Master Library | Support PISO-CAN serials, PEX-CAN serials and PCM-CAN with DeviceNet master library |
| PISO-DNM100U-D PISO-DNM100U-T |
1 Port Intelligent DeviceNet Master Communication Board with DeviceNet Firmware Inside for universal PCI bus |
| I-7565-DNM-G CR | USB/DeviceNet Master communication Converter with D-sub 9-pin connector |
| I-8124W | 1 Port DeviceNet Master Module with dual port RAM |
| I-87124 | 1 Port High Performance DeviceNet Master Module |
| CA-0910-C | 9-pin Female D-sub & 3-wire CAN bus cable (1M) |
