Module DeviceNet Slave 16 kênh đầu ra số (DO) Open-collector ICP DAS CAN-2057D
DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.
The CAN-2057D follows DeviceNet specification Volume I/II, Release 2.0. User can access the digital output status and set the configuration via DeviceNet EDS file. The CAN-2057D has 16 Digital output channels with Open Collector output type and can be used to develop powerful and cost effective digital control system. By owing to the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements. For more information about the DeviceNet master interfaces and other DeviceNet products, please refer to the following web site.
Applications
-
Alarm output
-
Switch control

We have communicated with the following DeviceNet masters or gateways.
- Allen-Bradley(AB) 193-DNENCAT, 193-DNENCATR
- OMRON CJ1W-DRM21
- OMRON CS1W-DRM21-V1
- OMRON C200HW-DRM21-V1
- OMRON 3G8F7-DRM21-E
Hardware Specifications
|
DeviceNet Interface
|
|
|
DeviceNet Specification
|
Volume I, Release 2.0 & Volume II, Release 2.0, Errata5
|
|
DeviceNet subscribe
|
Group 2 Only Server
|
|
Connection supported
|
1 connection for Explicit Messaging
1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
|
Baud Rate Setting by Rotary Switch
|
125 kbps, 250 kbps, 500 kbps
|
|
Node ID Setting by Rotary Switch
|
0 ~ 63
|
|
Heartbeat message
|
Yes
|
|
Shutdown message
|
Yes
|
|
Terminator Resistor
|
Switch for 120 Ω terminator resistor
|
|
Connector
|
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
|
EDS file
|
Yes
|
|
LED
|
PWR/NET/MOD
|
|
Digital Output
|
|
|
Channels
|
16 (Sink)
|
|
Load Voltage
|
+5 ~ +30 VDC
|
|
Output Max Load Current
|
100 mA per channel
|
|
Output Type
|
Open Collector
|
|
Intra-module Isolation
|
3750 Vrms
|
|
ESD Protection
|
4 kV Contact for each channel
|
|
LED
|
|
|
DeviceNet Status
|
3 LEDs for PWR/NET/MOD
|
|
Terminal Resister
|
1 LED as terminal resister indicators
|
|
DO LED
|
16 LEDs as digital output indicators
|
|
Power
|
|
|
Power Supply
|
Unregulated +10 ~ +30 VDC
|
|
Power Consumption
|
1.5 W
|
|
Mechanism
|
|
|
Installation
|
DIN-Rail
|
|
Dimensions
|
32.3 mm x 99 mm x 77.5 mm ( W x L x H )
|
|
Environment
|
|
|
Operating Temp.
|
-25 ~ 75 ℃
|
|
Storage Temp.
|
-30 ~ 80 ℃
|
|
Humidity
|
10 ~ 90% RH, non-condensing
|
Ordering Infomation
|
CAN-2057D
|
DeviceNet Module of 16-channel Isolated Open Collector Digital Output |
Related Products
| DeivceNet Master Library | Support PISO-CAN serials, PEX-CAN serials and PCM-CAN with DeviceNet master library |
| PISO-DNM100U-D PISO-DNM100U-T |
1 Port Intelligent DeviceNet Master Communication Board with DeviceNet Firmware Inside for universal PCI bus |
| I-7565-DNM-G CR | USB/DeviceNet Master communication Converter with D-sub 9-pin connector |
| I-8124W | 1 Port DeviceNet Master Module with dual port RAM |
| I-87124 | 1 Port High Performance DeviceNet Master Module |
| CA-0910-C | 9-pin Female D-sub & 3-wire CAN bus cable (1M) |
