Module DeviceNet Slave 16 kênh đầu vào số (DI) Sink/Source ICP DAS CAN-2053D
DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.
The CAN-2053D follows DeviceNet specification Volume I/II, Release 2.0. User can access the digital output status and set the configuration via DeviceNet EDS file. CAN-2053D has 16-channel isolated sink/source input and it can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements. For more information about the DeviceNet master interfaces and other DeviceNet products, please refer to the following web site.
Applications
-
Alarm detector
-
Switch detection

Hardware Specifications
|
DeviceNet Interface
|
|
|
DeviceNet Specification
|
Volume I, Release 2.0 & Volume II, Release 2.0, Errata5
|
|
DeviceNet subscribe
|
Group 2 Only Server
|
|
Connection supported
|
1 connection for Explicit Messaging
1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
|
Baud Rate Setting by Rotary Switch
|
125 kbps, 250 kbps, 500 kbps
|
|
Node ID Setting by Rotary Switch
|
0 ~ 63
|
|
Heartbeat message
|
Yes
|
|
Shutdown message
|
Yes
|
|
Terminator Resistor
|
Switch for 120 Ω terminator resistor
|
|
Connector
|
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
|
EDS file
|
Yes
|
|
LED
|
PWR/NET/MOD
|
|
Digital Input
|
|
|
Channels
|
16 (Sink/Source)
|
|
ON Voltage Level
|
+3.5 ~ +30 VDC
|
|
OFF Voltage Level
|
+1 VDC Max.
|
|
Input Impedance
|
3 kΩ, 0.3 W
|
|
Intra-module Isolation
|
3750 Vrms
|
|
ESD Protection
|
4 kV contact for each channel
|
|
LED
|
|
|
DeviceNet Status
|
3 LEDs for PWR/NET/MOD
|
|
Terminal Resister
|
1 LED as terminal resister indicators
|
|
DI LED
|
16 LEDs as digital input indicators
|
|
Power
|
|
|
Power Supply
|
Unregulated +10 ~ +30 VDC
|
|
Power Consumption
|
1.5 W
|
|
Mechanism
|
|
|
Installation
|
DIN-Rail
|
|
Dimensions
|
32.3 mm x 99 mm x 77.5 mm ( W x L x H )
|
|
Environment
|
|
|
Operating Temp.
|
-25 ~ 75 ℃
|
|
Storage Temp.
|
-30 ~ 80 ℃
|
|
Humidity
|
10 ~ 90% RH, non-condensing
|
Ordering Infomation
|
CAN-2053D
|
DeviceNet Module of 16-channel Isolated Sink/Source Digital Input |
Related Products
| DeivceNet Master Library | Support PISO-CAN serials, PEX-CAN serials and PCM-CAN with DeviceNet master library |
| PISO-DNM100U-D PISO-DNM100U-T |
1 Port Intelligent DeviceNet Master Communication Board with DeviceNet Firmware Inside for universal PCI bus |
| I-7565-DNM-G CR | USB/DeviceNet Master communication Converter with D-sub 9-pin connector |
| I-8124W | 1 Port DeviceNet Master Module with dual port RAM |
| I-87124 | 1 Port High Performance DeviceNet Master Module |
| CA-0910-C | 9-pin Female D-sub & 3-wire CAN bus cable (1M) |
