Module CANopen Slave 8 kênh đầu vào RTD ICP DAS CAN-2015C
CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network system, such as industrial machine control , vehicle control system, factory automation, medical equipment control, remote data acquisition, environmental monitoring, and packaging machines control, etc.
The CAN-2015C is a CANopen slave which follows the CiA 301 version 4.02 and CiA 401 version 2.1. This module provides 8 RTD input channels, and users can obtain the RTD input data or configure the CAN-2015C via the standard CANopen protocol. In order to be fully compatible with other CANopen devices, the CAN-2015C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, it is very easy to integrate the CAN-2015C with the standard CANopen master by applying the EDS file. Combining with the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements.
Applications

Hardware Specifications
| CANopen Interface | |
| Connector | 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
| Baud Rate (bps) | 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch |
| Terminator Resistor | DIP switch for the 120 Ω terminator resistor |
| Protocol | CANopen CiA 301 ver4.02, CiA 401 ver2.1 |
| Node ID | 1~99 selected by rotary switch |
| NMT | Slave |
| Error Control | Node Guarding protocol / Heartbeat Producer |
| SDOs | 1 server, 0 client |
| PDOs | 10 RxPDO, 10 TxPDO (Supports dynamic PDO) |
| PDO Modes | Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic) |
| Emergency Message | Yes |
| EDS file | Yes |
| Analog Input | |
| Channels | 8 channels for 2-wire or 3-wire RTD |
| Input Type | Pt100, Pt1000, Ni120, Cu100, Cu1000, JPt100 |
| Resolution | 16-bit |
| Sampling Rate | 10 Samples/Sec. (Total) |
| Accuracy | +/-0.05% FSR |
| Zero Drift | +/- 0.5 μV/ °C |
| Span Drift | +/- 20 ppm/ °C |
| Common Mode Rejection | 150 dB |
| Normal Mode Rejection | 100 dB |
| Individual Channel Configuration | Yes |
| Open Thermocouple Detection | Yes |
| Over voltage Protection | 120 VDC / 110 VAC |
| Input Impedance | 20 MΩ |
| Isolation | 3000 V DC-DC isolation, 3000 Vrms photo-coupler isolation |
| Hardware | |
| ESD Protection | Contact 4 kV class A |
| LED | |
| LEDs | PWR LED, RUN LED, ERR LED |
| Power | |
| Power Supply | Unregulated +10 ~ +30 VDC |
| Power Consumption | 1.5 W |
| Mechanism | |
| Casing | Plastic case, fire-retardant materials (UL94-V0 Level) |
| Installation | DIN-Rail |
| Dimensions | 33 mm x 99 mm x 78 mm ( W x L x H ) |
| Environment | |
| Operating Temp. | -25 ~ 75 ℃ |
| Storage Temp. | -30 ~ 80 ℃ |
| Humidity | 10 ~ 90% RH, non-condensing |
Ordering Infomation
| CAN-2015C | CANopen slave module of 8-channel RTD inputs |
Related Products
| PISO-CAN200/200U | 2-Port Isolated Protection CAN Communication Board |
| PISO-CAN400/400U | 4-Port Isolated Protection CAN Communication Board |
| PISO-CM100U | One Standalone Intelligent CAN Communication Card |
| I-7565-CPM | USB/CANopen Master Converter Module |
| I-8123W | 1 Port High Performance CANopen Master Slot Module |
| I-87123 | 1 Port CANopen Master Slot Module |
