Module CANopen Slave 4 kênh đầu vào số (DI) + 4 kênh đầu ra Relay ICP DAS CAN-2060C
CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network of machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.
CAN-2060C module follows the CiA-301 version 4.02 and CiA-401 version 2.1. You can access the digital I/O status and set the configuration by using standard CANopen protocol. CAN-2060C has passed the validation of the CiA CANopen conformance test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2060C has 4 isolated sink/source input channels and 4 Relay output channelsl, It can be used to various applications. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.
Applications

Hardware Specifications
| CANopen Interface | |
| Connector | 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
| Baud Rate (bps) | 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch |
| Terminator Resistor | DIP switch for the 120 Ω terminator resistor |
| Protocol | CANopen CiA 301 ver4.02, CiA 401 ver2.1 |
| Node ID | 1~99 selected by rotary switch |
| NMT | Slave |
| Error Control | Node Guarding protocol / Heartbeat Producer |
| SDOs | 1 server, 0 client |
| PDOs | 10 RxPDO, 10 TxPDO (Supports dynamic PDO) |
| PDO Modes | Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic) |
| Emergency Message | Yes |
| EDS file | Yes |
| Digital Input | |
| Channels | 4 (Sink/Source) |
| On Voltage Level | 3.5 ~ 30 VDC |
| Off Voltage Level | +1 VDC Max |
| Input Impedance | 3kΩ, 0.3W |
| Response Time | 250 us |
| Intra-module Isolation | 3750 Vrms |
| ESD Protection | 4kV for each channel |
| Relay Output | |
| Channels | 4 |
| Type | Form A (SPST-NO) |
| Output Max. Load Current | 5A, each channel |
| Operate Time: | 10ms max |
| Release Time | 5ms max |
| LED | |
| CANopen Status | 3 LEDs to PWR, RUN and ERR |
| Terminal Resister | 1 LED to terminal resister indicator |
| DI LED | 4 LEDs to digital input indicator |
| DO LED | 4 LEDs to digital output indicator |
| Power | |
| Power Supply | Unregulated +10 ~ +30 VDC |
| Power Consumption | 1.7 W |
| Mechanism | |
| Installation | DIN-Rail |
| Dimensions | 33 mm x 99 mm x 78 mm ( W x L x H ) |
| Environment | |
| Operating Temp. | -25 ~ 75 ℃ |
| Storage Temp. | -30 ~ 80 ℃ |
| Humidity | 10 ~ 90% RH, non-condensing |
Ordering Infomation
|
CAN-2060C
|
CANopen slave module of 4-channel DI and Relay Output |
Related Products
| PISO-CAN200/200U | 2-Port Isolated Protection CAN Communication Board |
| PISO-CAN400/400U | 4-Port Isolated Protection CAN Communication Board |
| PISO-CM100U | One Standalone Intelligent CAN Communication Card |
| I-7565-CPM | USB/CANopen Master Converter Module |
| I-8123W | 1 Port High Performance CANopen Master Slot Module |
| I-87123 | 1 Port CANopen Master Slot Module |
