Card PCI 32 kênh đầu vào tương tự, 2 kênh đầu ra tương tự, 32 kênh DIO ICP DAS PCI-826LU CR
Features
- Universal PCI (3.3 V/5 V) Interface
- Supports Card ID (SMD Switch)
- 32 Single-ended/16 Differential Analog Input Channels
- 16-bit 250 kS/s High-speed AD
- Built-in MagicScan Controller
- Supports Software-trigger and Pacer-trigger
- 8 K-sample Hardware FIFO
- 2-channel, 16-bit Analog Output
- 32-channel programmable DI/O
- Pull-high and Pull-low Resistors for DI Channels
- Supports Digital Output Status Readback (Register Level)
Introduction
The PCI-826LU is a high performance multifunction card providing high-speed analog I/O and digital I/O functions. The PCI-826LU card has a universal PCI interface supporting both 3.3 V and 5 V PCI bus. This card features a continuous, 250 k Samples/Sec 16-bit resolution A/D converter, 8 K samples hardware FIFO, 2-ch 16-bit D/A converter, 32-ch programmable digital I/O and DO read back.The PCI-826LU provides either 32-ch single-ended or 16-ch differential AIs which are jumper selectable. The PCI-826LU is equipped with a high speed PGA featuring programmable gain controls (1, 2, 4, 8).
The PCI-826LU has the Card ID switch and pull-high/pull-low resisters for DI on board. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PCI-826LU cards in one computer. The pull-high/pull-low resisters allow specifying the DI status; when the DI channels are unconnected, the DI status will remain in high or low status other than floating.
The PCI-826LU provides two programmable trigger methods: software trigger and pacer trigger. The A/D channel scan function of PCI-826LU is so amazing, we call it MagicScan. The MagicScan controller takes out most works of getting A/D value such as select channel, set gain, settling time, trigger ADC and get data. With the built-in MagicScan and interrupt features, it is effectively off-loading your CPU from the job. Even in channel scan mode, it can have different gain code for each channel, and the sampling rate can still reach 250 kS/s totally. The PCI-826LU is suitable for high end applications.
|
ICP DAS PC-Based Multifunction Board Selection Guide
|
|||||||||
|
Model Name
|
D/A Channel
|
A/D Channel
|
A/D Sampling Rate
|
FIFO Size
|
Software Trigger (Polling)
|
Pacer Scan (Magicscan)
|
Post-trigger Pre-trigger Middle-trigger
|
Interrupt function
|
|
| PCI-1202LU |
12-bit, 2-ch
|
12-bit, 32 S.E/16 Diff
|
110 kS./s
|
1 k
|
V
|
V
|
V
|
–
|
|
| PCI-1202HU |
12-bit, 2-ch
|
12-bit, 32 S.E/16 Diff
|
44 kS./s
|
1 k
|
V
|
V
|
V
|
–
|
|
| PCI-1602U |
12-bit, 2-ch
|
16-bit, 32 S.E/16 Diff
|
100 kS./s
|
8 k
|
V
|
V
|
V
|
–
|
|
| PCI-1602FU |
12-bit, 2-ch
|
16-bit, 32 S.E/16 Diff
|
200 kS./s
|
8 k
|
V
|
V
|
V
|
–
|
|
| PCI-1800LU |
12-bit, 2-ch
|
12-bit, 16 S.E/8 Diff
|
330 kS./s
|
1 k
|
V
|
V
|
V
|
–
|
|
| PCI-1800HU |
12-bit, 2-ch
|
12-bit, 16 S.E/8 Diff
|
44 kS./s
|
1 k
|
V
|
V
|
V
|
–
|
|
| PCI-1802LU |
12-bit, 2-ch
|
12-bit, 32 S.E/16 Diff
|
330 kS./s
|
8 k
|
V
|
V
|
V
|
–
|
|
| PCI-1802HU |
12-bit, 2-ch
|
12-bit, 32 S.E/16 Diff
|
44 kS./s
|
8 k
|
V
|
V
|
V
|
–
|
|
| PCI-822LU |
16-bit, 2-ch
|
12-bit, 32 S.E/16 Diff
|
250 kS./s
|
8 k
|
V
|
V
|
V
|
V
|
Cost-effective Programmable DIO
|
| PCI-826LU |
16-bit, 2-ch
|
16-bit, 32 S.E/16 Diff
|
250 kS./s
|
8 k
|
V
|
V
|
V
|
V
|
Cost-effective Programmable DIO
|
Applications
- High speed data acquisition system
- Process monitor and control.
- Vibration analysis.
Specifications
| Hardware | |
|---|---|
| Card ID | Yes (4-bit) |
| Connector | Female DB37 x 1 20-pin box header x 2 |
| Analog Input | |
|---|---|
| Channels | 32 single-ended/16 differential |
| Range | Gain: 1, 2, 4, 8 Bipolar Range: ±10 V, ±5 V, ±2.5 V, ±1.25 V |
| Resolution | 16-bit |
| Accuracy | 0.05 % of FSR ±1 LSB @ 25 °C, ±10 V |
| Sampling Rate | 250 kS/s. Max. |
| Overvoltage Protection | Continuous ±35 Vp-p |
| Zero Drift | 15 ppm/°C of FSR |
| FIFO Size | 8192 samples |
| Trigger Mode | Software, Pacer |
| Data Transfer | Polling, Interrupt |
| Analog Output | |
|---|---|
| Channels | 2 |
| Range | -5 V ~ 5 V , -10 V ~ 10 V, 0 ~ 10 V, 0 ~ 5 V |
| Resolution | 16-bit |
| Accuracy | ±6 LSB |
| Voltage Output Capability | ±5 mA |
| Response Time | 250 KHz (Typical) |
| Slew Rate | 0.7 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
|---|---|
| Channels | 32 (Bi-Direction) |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Pull-high/Pull-low Resistors | Yes |
| Trigger Mode | Static Update |
| Digital Output | |
|---|---|
| Channels | 32 (Bi-Direction) |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 40 mA Source: 20 mA |
| Response Speed | 1.0 MHz (Typical) |
| DO Readback | Yes |
| PC Bus | |
|---|---|
| Type | 3.3 V/5 V Universal PCI, 32-bit |
| Data Bus | 16-bit |
| Power | |
|---|---|
| Consumption | 1 A @ +5 V (Max.) |
| Mechanical | |
|---|---|
| Dimensions (mm) | 150 X 170 X 22 (W x L x D) |
| Environment | |
|---|---|
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Ordering Infomation
| PCI-826LU CR | Universal PCI, 250 kS/s, 32-ch, 16-bit AI Multifunction Board (8 K WORD FIFO) (8 K WORD FIFO) (RoHS) Includes one CA-4002 D-Sub connector |
Accessories

