Card PCI Bus điều khiển chuyển động 2 trục (2-axis motion control) ICP DAS PISO-PS200
Features
- Independent 2-axis motion control
- Support for hand wheel and jog functions
- 2-axis linear / 2-axis circular interpolation function
- Continuous interpolation function
- Programmable T/S-curve acceleration and deceleration
- A maximum pulse output rate of 4 Mpps for each axis
- Pulse Output Types: CW/CCW or PULSE/DIR
- 32-bit encoder counter for each axis
- Encoder Pulse Input Types: A/B Phase or Up/Down
- Programmable automatic homing for each axis
- Programmable software limits
- Expandable Remote I/O: 128 DI and 128 DO via a two-wire FRnet interface
Introductions
The PISO-PS200 is a 2-axis stepping/pulse-type servo motor control card that can be used on any IPC with a 5 V PCI bus, and is suitable for general-purpose motion control applications. This card equipped with one FRnet Master which allows the fast remote I/O of the IPC to be expanded easily. The two-wired FRnet interface allows a maximum 128 DI and 128 DO channels, which are automatically scanned within a period of 2.88 ms.
In addition to its wide speed range, this intelligent motion controller also has a variety of motion control functions built in, such as 2-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/deceleration, numerous synchronous actions, automatic homing, and others. A major advantage is that the majority of the PISO-PS200 motion control functions are performed by the high-performance motion ASIC with little load on the processor. The motion status, FRnet I/O, and the other I/O cards on the IPC can still be monitored while driving the motors.
As the low CPU loading requirements of the PISO-PS200 is minimal, one or more motion cards can be used with a single IPC. ICP DAS also provides a variety of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-effective solution for motion control application developers.
![]() |
![]() |
![]() |
![]() |
||
Specification
| Number of Axes | 2 |
| Slot Interface | 5 V PCI bus |
| Maximum Pulse Output Rate | 4 MHz |
| Command Type | Pulse Command |
| Resolution | 32-bit |
| Pulse Output Mode | CW/CCW, PULSE/DIR |
| Operation Mode | Semi-closed Loop |
| Linear Interpolation | 2 axes |
| Circular Interpolation | 2 axes |
| Speed Curve Profile | T/S-curve |
| Motion Relative I/O | Home, LMT+/-, NHOME, EMG, INP, ALM, SVON |
| Synchronous Action | – |
| Ring Counter Mode | 32-bit |
| Position Control Mode | Incremental mode |
| Position Compare Trigger | – |
| Encoder Interface | A/B pulse, Up/Down |
| Encoder Counter | 32-bit |
| Encoder Rate | 4 MHz |
| Digital Input Channels | Expandable: 128 DI |
| Digital Output Channels | Expandable: 128 DO |
| I/O Isolation (with DN-8237) | 2500 Vrms optical isolation |
| Connector | 37-pin D-Sub |
| Power Consumption | +5 V @ 500 mA |
| Environmental | |
| Operating Temperature | -20 ~ +75°C |
| Storage Temperature | -30 ~ +85°C |
| Ambient Relative Humidity | 5 ~ 90% RH, non-condensing |
| Software Support | |
| Windows Driver/DLL/Lib | Windows XP/2000 |
| DOS Library | – |
| Labview Development Kit | – |
| Linux Library | – |
Ordering information
| PISO-PS200 | PCI Bus, High-speed 2-axis Motion Control Card with FRnet Master |
Accessories
| DN-8237UB | Photo-isolated Universal Snap-on Wiring Terminal Board |
| DN-8237GB | Photo-isolated General Purpose Wiring Terminal Boar |
| DN-8237MB | Photo-isolated Snap-on Wiring Terminal Board for Mitsubishi MELSERVO-J2 Servo Amplifier |
| DN-8237PB | Photo-isolated Snap-on Wiring Terminal Board for Panasonic MINAS A4/A5 Servo Amplifier |
| DN-8237YB | Photo-isolated Snap-on Wiring Terminal Board for Yaskawa Sigma II/III/V Servo Amplifier |
| DN-8237DB | Photo-isolated Snap-on Wiring Terminal Board for Delta ASDA-A Servo Amplifier |
| CA-3715DM-H | 37-pin D-Sub Male-Male Cable for Terminal Board (180º), Length 1.5 M |
| CA-3730DM-H | 37-pin D-Sub Male-Male Cable for Terminal Board (180º), Length 3.0 M |
| CA-3750DM-H | 37-pin D-Sub Male-Male Cable for Terminal Board (180º), Length 5.0 M |




