Module CPU Cimon CM1-CP3E (32K step/ 1024 pts./ RTC/ USB port/ RS232/ FW upgrade)
Features
Built-in Functions
+ PID Control – PID operation can be executed without an additional PID module.
+ RTC (Excluding CP*A Type) – Reads the time from the RTC module and stores the value at the F device memory location.
+ I/O Reservation – Detects whether the correct card is installed in the designated slot. Additionally, when expanding or exchanging parts, reservation to writing a program can be made without making changes to the I/O.
+ Modification of program during RUN mode – program can be modified while PLC is in the RUN mode.
+ RS-232 port (CP4C, CP3E, CP4E/F)
+ RS-422 / 485 port (CP4D/U, CP4F)
+ RS-232 port for Loader communication (CP3A/B/P/U, CP4A/B/C/D/U)
Self-diagnosis Functions
+ Monitoring processing delay – processing delay caused by user program errors can be monitored.
+ Module removal check – checks if the module was removed from the base or mounted incompletely on the base.
+ Memory error – if an error occurs in the CPU flash memory or in a card, error is displayed in the F device memory location.
+ Battery – F0034 will be ON when the battery needs to be replaced.
+ Power – if the voltage supplied to the power is lower than the required level, the power error will be detected and malfunction preventative measures will be automatically executed
Performance Specification
| Item | CM1-CP3E | CM1-CP4E | CM1-CP4F | |
| Program Control | Repetitive operation, Stored Program (ROM mode), Periodic operation | |||
| Method for Controlling I/O | Indirect method, Direct method by instruction, Scan synchronous batch processing system (I/O refresh) | |||
| Program Language | LD(Ladder Diagram), IL(Instruction List), SFC(Sequential Function Chart), FB (Function Block), FB Extension | |||
| Number of Instruction | Basic Instruction : 60 , Application instruction : 480 | |||
| Data Processing |
LD | 0.084㎲/step | 0.028㎲/step | |
| Program Memory | 512 Kbyte | 256 Kbyte | ||
| Number of Program Block | Max 128, up to 65,530 STEPs per block (PID) | |||
| Number of I/O | 1,536 | 384 | ||
| Number of I/O Device | 32,768 | 8,192 | ||
| Supporting Program |
LD | Scan, Subroutine, Initialize (COLD), Initialize (HOT), Periodic interruption | ||
| Special Configuration |
Initializing special card, PID control, Thermistor setting, Loadcell setting, IO Input module filter setting | |||
| Communication | User protocol(Serial), User protocol(Ethernet), MODBUS TCP/RTU Master, Ethernet High-speed link, CIMON-NET Master / Slave, DNP3, Public network IP setting, |
|||
| SFC | SFC Program | |||
| Periodic Interruption | Maximum 15, cycle setting (10~60,000msec, Unit :10ms), priority setting(0~14) | |||
| Base Expansion | Maximum 3 (10Base –T) | – | ||
| Max. Distance | Electricity (100m) | – | ||
| Redundancy | – | |||
| RUN mode | LOCAL / Remote (RUN, STOP, PAUSE) | |||
| Restarting | Cold, Hot Restart | |||
| Self-Diagnosis | Monitoring delay of processing, problems of memory, IO, battery, power error | |||
| Data Preservation Against Power Failure |
K device and conservation (Latch) in M, L, T, C, S, D device | |||
| WDT | Maximum 5000msec (Unit: 10msec) | |||
| Timer | On Delay, Off Delay, Addition, Monostable, Retriggerable Cycle: Either 10 or 100msec TC(Current value)/TS(Setting value) |
|||
| Counter | UP, DOWN, UP/DOWN, RING COUNTER, CC(Current value)/CS(Setting value) No limitation on number of points Count range : -32,768 ~ +32,767 |
|||
| PID | 32 Channels, Auto-Tuning | |||
| Communication Channels |
USB | USB 2.0 Mini-B : For Loader Protocol | ||
| Serial | RS-232C (Maximum 38,400bps) : CICON Loader, CIMON-HMI, MODBUS RTU Slave / Connection Type: Terminal Block |
|||
| Serial | – | – |
|
|
| Event Log | Power, Mode, Error | |||
| Power | 5Vdc , 195mA | 5Vdc , 70mA | 5Vdc , 100mA | |
| Weight(g) | 140g | 127g | 137g | |
| Capacity of Scan Program | 32K Step | 16K Step | ||
| Device Memory |
X | 1,536 | 384 | |
| Y | 1,536 | 384 | ||
| M | 8,192 | |||
| L | 2,048 | |||
| K | 2,048 | |||
| F | 2,048 | |||
| T | 1,024 (Select between 10ms and 100ms) | |||
| C | 1,024 | |||
| S | 100Card * 100Step | |||
| D | 10,000 Word | 5,000 Word | ||
| Z | 1,024 Word | |||
| R | 16 Word | |||
| Q | 512 Word | |||
