Card ISA 96 kênh đầu vào/ra số OPTO-22 (DIO) ICP DAS DIO-96
Features
- Double side SMT , short card, power saving
- DIO-144 : 144 digital I/O lines
DIO-96 : 96 digital I/O lines - Emulate 8255 mode 0 (Basic Input / Output mode)
- Buffer output for higher driving capability than 8255
- Register compatible to 722 series
- Programmable interrupt handling
- DIO-144 : Six 50-pin Header
DIO-96 : Four 50-pin Header - Output status readback
Introduction
The DIO-144/96 provides 144/96 TTL digital I/O lines. The DIO-144/96 emulates 8255 mode 0 and has an increased output current of 15 mA (source) and 64 mA (sink) , allowing it to control LED, relay, etc. The DIO-144/96 consists of eighteen 8 bit bi-directional ports and 2 input lines for interrupt enable and interrupt. The 8 bit ports are named port A(PA),port B(PB) and port C(PC). The port C can be split into two four bit. All port are configured as inputs upon power-up or reset. The DIO-144/96 uses 4 consecutive I/O locations in I/O addressing space. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 15.
Application
- Factory automation
- Product test
- Test automation
- Digital I/O control
- Alarm monitoring
- 4-channel SSR Output Daughter Board
Software
- DOS sample program(with source codes)
- DLL and OCX SDK for Windows 98/NT/2000
- DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
- VB/VC/Delphi/BCB sample programs with source codes are included
- LabVIEW toolkit for Windows
- Driver for Linux and DasyLab
Specification
| Model Name | DIO-96 | DIO-144 |
| Digital Input | ||
| Channels | 96 (OPTO-22 compatible) | 144 (OPTO-22 compatible) |
| Compatibility | 5 V/TTL | |
| Input Voltage | Logic 0: 0.8 V max. Logic 1: 2.0 V min. |
|
| Response Speed | 1.0 MHz (Typical) | |
| Digital Output | ||
| Channels | 96 (OPTO-22 compatible) | 144 (OPTO-22 compatible) |
| Compatibility | 5 V/TTL | |
| Output Voltage | Logic 0: 0.4 V max. Logic 1: 2.4 V min. |
|
| Output Capability | Sink: 0.8 mA @ 0.8 V Source: -2.4 mA @ 2.0 V |
|
| Response Speed | 1.0 MHz (Typical) | |
| General | ||
| Bus Type | ISA | |
| I/O Connector | 50-pin box header x 4 | 50-pin box header x 6 |
| Dimensions (L x W x D) | 182 mm x 120 mm x 22 mm | |
| Power Consumption | 800 mA @ +5 V | 700 mA @ +5 V |
| Operating Temperature | 0 ~ 60 °C | |
| Storage Temperature | -20 ~ 70 °C | |
| Humidity | 5 ~ 85% RH, non-condensing | |
Ordering information
| DIO-96 CR | 96-channel Digital I/O Board (RoHS) |
| DIO-144 CR | 144-channel Digital I/O Board (RoHS) |
