Tự động hóa IoT
Nhà cung cấp thiết bị truyền thông, viễn thông, tự động hóa IoT chuyên nghiệp, liên hệ: Tel/Zalo +84 904 251 826

Giao thức truyền thông J1939 là gì, thiết bị và bộ chuyển đổi J1939

Lượt xem: 185

Giao thức truyền thông J1939 là gì

J1939 is the vehicle bus standard used for communication and diagnostics among vehicle components, originally by the car and heavy duty truck industry in the United States. Because of the success of applying in vehicles, J1939 has become the accepted industry standard and the vehicle network technology of choice for off-highway machines in applications such as construction, material handling, and forestry machines. It is a higher-layer protocol based on Controller Area Network (CAN), which provides serial data communications between microprocessor systems (ECU) in any kind of heavy duty vehicles. The messages exchanged between these units can be data such as vehicle road speed, torque control message from the transmission to the engine, oil temperature, and many more.

CAN bus application layers

All J1939 packets contain eight bytes of data and a standard header which contains an index called PGN (Parameter Group Number), which is embedded in the message’s 29-bit identifier. A PGN identifies a message’s function and associated data. J1939 attempts to define standard PGNs to encompass a wide range of automotive, agricultural, marine and off-road vehicle purposes. A range of PGNs (00FF00(hex) through 00FFFF(hex), inclusive) is reserved for proprietary use. PGNs define the data which is made up of a variable number of SPN elements defined for unique data. For example, there exists a predefined SPN for engine RPM.
J1939 uses three methods to communicate over the CAN bus. Destination specific communications use the PDU1 (Protocol Data Unit 1) format to send and receive data. The PDU1 format allows a message to be directed to specific ECU (CAN Node). The destination address is included in the CAN PDU1 CAN frame. Broadcast Communications use the PDU2 (Process Data Unit 2) format to send a message to multiple nodes. The PDU2 message format identifies a message number versus a node number. In these applications receiving ECU’s monitor the CAN bus for specific messages. For example a display unit may ignore all other messages as it monitors the bus waiting for the PDUs containing Fuel Temperature and Fuel Pressure.

Features

  • Higher-layer protocol based on CAN bus
  • The speed is nearly always 250 kbit/s
  • 29-bit identifier CAN 2.0B
  • Used in heavy-duty vehicles
  • Peer-to-peer and broadcast communication
  • Transport protocols for up to 1785 data bytes
  • Network management
  • Definition of parameter groups

Thiết bị và bộ chuyển đổi J1939

Model J1939
Module Name GW-7228-G

GW-7238D-G

Support Protocol J1939
Modbus RTU Slave
J1939
Modbus TCP server/RTU Slave
Comm.
Interface
RS-232
RS-422
RS-485
RS-232
RS-485
Ethernet

 

Bình luận