Bộ điều khiển 16 kênh bán dẫn DC Campbell Scientific SDM-CD16S
With an SDM-CD16S, your data logger can control dc devices that have a relatively high-powered load, such as solenoids, solenoid valves, dc motors, stepper motors, lights, horns, heaters, and fans. With a voltage range of up to 48 Vdc and a maximum current output per channel of 2 A, the SDM-CD16S can drive up to 100 W of power on each channel.
Benefits and Features
- Allows the data logger to automatically turn devices on or off when a threshold (for example, temperature or water depth) has been reached
- Provides a manual override
- Includes LEDs for a visual indicator of active outputs
- Drives up to 100 W of power on each channel
This relay driver provides 16 dc voltage outputs that can be switched on and off manually or under data logger control. The SDM-CD16S’s toggle switch has three positions: MANUAL, OFF, and AUTO.
- In the MANUAL position, outputs are controlled by the position of the individual rocker switches.
- In the OFF position, all outputs are off.
- In the AUTO position, the state of the relays is controlled by the SDM commands from the data logger or by the logic control inputs.
Separate inputs for power-to-outputs (48 Vdc maximum) and power-to-SDM-CD16S logic (7 to 48 Vdc) allow the option of powering the logic from the data logger’s 12 V while switching a higher voltage.
The SDM-CD16S is a synchronously addressed data logger peripheral. Data logger control ports 1, 2, and 3 are used to address the SDM-CD16S, then clock out the desired state of each of the eight control ports. Up to 15 SDM-CD16S devices may be addressed, making it possible to control a maximum of 256 ports from the first three data logger control ports.
Data Logger Connection
The CABLE5CBL-L is recommended for connecting the module to the data logger. A 1-ft cable length should be sufficient when both data logger and SDM-CD16S are housed within an ENC12/14 enclosure; a 2-ft length may be required if the data logger and SDM-CD16S are housed at opposite ends of an ENC16/18 Enclosure. The cable length should be as short as possible. Typically, the maximum cable length is 20 ft. Contact Campbell Scientific if the length needs to be longer.
|Function||Allows the data logger to control dc devices that have a relatively high-powered load, such as solenoids, solenoid valves, dc motors, stepper motors, lights, horns, heaters, and fans.|
|Number of Channels||16|
|Isolation||Optically isolated between the inputs and outputs|
|Logic Power Voltage||7 to 48 Vdc|
|Logic Current Drain (@ 12 Vdc)|
|Supply Voltage for Output||48 V max (dc only)|
|Operating Voltage||12 Vdc|
|Fuse||3 AG 10 A|
|Actuation/Release Times||8 μs/200 μs|
|Operating Temperature||-40° to +70°C|
|Maximum Cable Length||6 m (20 ft) total to all SDM devices|
(Contact Campbell Scientific if longer lengths are necessary.)
|Dimensions||24.1 x 12.7 x 6.4 cm (9.5 x 5.0 x 2.5 in.)|
|Weight||771.1 g (1.7 lb)|