Switch công nghiệp 5 cổng Ethernet IP67 ICP DAS NS-205-IP67
Features
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Rugged RJ45 Connector for anti-vibration and shock
- IP67 grade protection approval
- 4 PoE ports with Power Sourcing Equipment (PSE) operation
(NS-205PSE-IP67 series) - Auto-detection of PD (powered devices) and automatic power management (NS-205PSE-IP67 series)
- Over-temperature, over-current and over/under-voltage detection (NS-205PSE-IP67 series)
Introduction
The NS-205PSE-IP67/NS-205-IP67 is designed for industrial applications in harsh environments. The rugged RJ-45 ensure tight, robust connections, and guarantee reliable operation, even for applications that are subject to high vibration and shock.
The NS-205PSE-IP67 PoE switch provide 5 fast Ethernet with 4 IEEE 802.3af compliant PoE ports. The switch is classified as power source equipment (PSE) and provide up to 15.4 W of power per port.
The Ethernet switch support IEEE 802.3/802.3u/802/3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provide an economical solution for your industrial Ethernet network.
Specification
Models | NS-205PSE-IP67 | NS-205-IP67 |
Technology | ||
Standards | IEEE 802.3, 802.3u, 802.3x, 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | |
Processing Type | Store & forward; wire speed switching | |
MAC Addresses | 1024 | |
Memory Bandwidth | 2 Gbps | 1.4 Gbps |
Frame Buffer Memory | 512 Kbit | 256 Kbit |
Flow Control | IEEE 802.3x fl ow control, back pressure flow control | |
Interface | ||
LED Indicators | PWR, 10/100M, Link/Act, Power Device is detected | PWR, 10/100M, Link/Act |
Ethernet Isolation | 1500 Vrms 1 minute | |
Connection | Rugged RJ-45 | |
Power Input | ||
Input Voltage Range | +46 ~ +53 VDC for PoE output | +10 ~ +30 VDC (1 kV Isolated) |
Power Consumption | 0.05 A @ 48 VDC without PD loading; 1.45 A @ 48 VDC with PD full loading |
0.12 A @ 24 VDC |
Protection | Power reverse polarity protection | |
Connection | IP67 PWR Plug | |
PoE Technology | ||
PoE Compliance | 100% IEEE 802.3af compliant | – |
PoE Classification | PSE (Power Sourcing Equipment) | – |
PoE Voltage | +46 ~ +48 VDC depending on power input | – |
PoE Power | Up to 15.4 watts per channel | – |
PoE Operation | Automatic detection and power management | – |
PoE Pin Assignments | V+ (Pin 1, 2), V- (Pin 3, 6) | – |
PoE Disconnect Mode | DC disconnect | – |
Mechanical | ||
Casing | Plastic | |
Flammability | UL 94V-0 | |
Environmental Rating | Protection rating IP67 for Operating Temperature -10 °C ~ +60 °C | |
Protection rating IP66 for for Operating Temperature -40 °C ~ +75 °C | ||
Dimensions (W x L x H) | 85 mm x 76 mm x 137 mm | 85 mm x 76 mm x 137 mm |
Installation | Wall mounting | Wall mounting |
Environment | ||
Operating Temperature | -10 °C ~ +60 °C (Protection rating IP67) | |
-40 °C ~ +75 °C (Protection rating IP66) | ||
Storage Temperature | -10 °C ~ +60 °C (Protection rating IP67) | |
-40 °C ~ +75 °C (Protection rating IP66) | ||
Ambient Relative Humidity | 100% RH for Operating Temperature -10 °C ~ +60 °C | |
10% ~ 90% RH, non-condensing for Operating Temperature -40 °C ~ +75 °C |
Ordering information
NS-205PSE-IP67 CR | Industrial 5-port unmanaged IP67 Ethernet switch with PoE Includes IP67 RJ45 Plug x 5, IP67 Power Plug x 1, Cap with Tether x 5 (RoHS) |
NS-205-IP67 CR | Industrial 5-port unmanaged IP67 Ethernet switch Includes IP67 RJ45 Plug x 5, IP67 Power Plug x 1, Cap with Tether x 5 (RoHS) |