Bộ đổi nguồn AC/DC 200W từ 85Vac~264Vac sang 12V Leyu NES-200-12
Thông số kĩ thuật
SPECIFICATION | ||||||||||||||
OUTPUT | ||||||||||||||
Model |
NES-200-5 |
NES-200-12 | NES-200-15 |
NES-200-24 |
NES-200-48 |
NES-200-50 |
||||||||
DC Voltage |
5V |
12V |
15V |
24V |
48V |
50v |
||||||||
Rated Current |
40A |
17A |
14A |
8.8A |
4.4A |
4A |
||||||||
Current Range |
0~40A |
0~17A |
0~14A |
0~8.8A |
0~4.4A |
0-4A |
||||||||
Rated Power |
200W |
198W |
196W |
194W |
192.5W |
190W |
||||||||
Ripple&Noise |
80mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
200mVp-p |
200mVp-p |
||||||||
Voltage Adj. Range | 4.75~5.5V |
11.4 ~ 13.5V |
14.25 ~ 16.5V |
22.8 ~ 27.6V |
45.6 ~ 52.8V |
45~55V |
||||||||
Voltage Tolerance |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
||||||||
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
||||||||
Load Regulation |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
||||||||
Setup,Rise Time | 800ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load | |||||||||||||
Hold Up Time | 24ms/230VAC 20ms/115VAC at full load | |||||||||||||
INPUT | ||||||||||||||
Voltage Range | 90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 373VDC | |||||||||||||
Frequency Range | 47 ~ 63Hz | |||||||||||||
Efficiency |
78% |
83% |
83% |
86% |
86% |
86% |
||||||||
AC Current | 3A/115VAC 2A/230VAC | |||||||||||||
Inrush Current | Cold Start 45A/230VAC | |||||||||||||
Leakage Current | <2mA / 240VAC | |||||||||||||
PROTECTION | ||||||||||||||
Over Load | 110 ~ 150% rated output power | |||||||||||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||
Over Voltage |
3.8 ~ 4.65V |
5.75~6.75V |
8.6 ~ 10.1V |
10.4 ~ 12.2V |
13.8~16.2V |
17.25~20.25V |
27.6~32.4V |
55.2~64.8V |
63.2~74.2V |
|||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||
ENVIRONMENT | ||||||||||||||
Working Temp. | -20 ~ +60℃ (Refer to output load derating curve) | |||||||||||||
Working Humidity | 20 ~ 90% RH non-condensing | |||||||||||||
StorageTemp., Humidity | -40 ~ +85℃, 10 ~ 95% RH | |||||||||||||
Temp. Coefficient | ±0.03%/℃ (0 ~ 50℃) | |||||||||||||
Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||||||||||
SAFETY &EMC | ||||||||||||||
Safety Standards | UL60950-1, CB(IEC60950-1),CCC GB4943 approved | |||||||||||||
Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||||||||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH | |||||||||||||
EMI Conduction & Radiation | Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B | |||||||||||||
Harmonic Current | Compliance to EN61000-3-2,-3,GB17625.1 | |||||||||||||
EMC Immunity | Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, heavy industry level, criteria A | |||||||||||||
OTHERS | ||||||||||||||
Dimension | 215*115*50mm (L*W*H) | |||||||||||||
Weight | 0.73Kg | |||||||||||||
Packing | 20pcs/carton | |||||||||||||
NOTE | ||||||||||||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meetsEMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. |