Bộ đổi nguồn tổ ong AC/DC 144W từ 220VAC sang 24V Leyu S-145-24
Thông số kĩ thuật
SPECIFICATIONS | |||||||
OUTPUT | |||||||
Model |
S-145-5 |
S-145-7.5 |
S-145-12 |
S-145-15 |
S-145-24 |
S-145-32 |
|
DC Voltage |
5V |
7.5V |
12V |
15V |
24V |
32V |
|
Rated Current |
25A |
18A |
12A |
9.6A |
6A |
4.5A |
|
Current Range |
0-25A |
0-18A |
0-12A |
0-9.6A |
0-6A |
0-4.5A |
|
Rated Power |
125W |
135W |
144W |
144W |
144W |
144W |
|
Ripple & Noise |
100mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
|
Voltage Adj. Range |
±10% |
-20%;+10% |
-12%;+10% |
-12%;+10% |
-12%;+16% |
-12%;+16% |
|
Voltage Tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
|
Setup, Rise, Hold Up Time | 100ms,50ms,20ms at full load | ||||||
INPUT | |||||||
Voltage Range | 85~132VAC/180~264VAC selected by switch 47~63Hz; 255~370VDC | ||||||
AC Current | 3.2A/115V 1.6A/230V | ||||||
Efficiency |
78% |
80.5% |
80.5% |
81% |
83.5% |
83.5% |
|
Inrush Current | Cold start 35A/230VAC | ||||||
Leakage Current | <3.5mA/240VAC | ||||||
PROTECTION | |||||||
Over Load | 135%~165% | ||||||
Protection type: Shut down o/p voltage, re-power on to recover | |||||||
Over Voltage | 115%~135% | ||||||
Protection type: Shut down o/p voltage, re-power on to recover | |||||||
ENVIRONMENT | |||||||
Working Temp., Humidity | -10℃~+60℃; 20%~90%RH | ||||||
Storage Temp., Humidity | -20℃~+85℃; 10%~95%RH | ||||||
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||||||
SAFETY | |||||||
Withstand Voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | ||||||
STANDARD | |||||||
Safety Standard | Design refer to UL1012 | ||||||
EMC Standard | Design refer to EN55022,IEC801-2,3,4 | ||||||
OTHERS | |||||||
Dimension | 199*98*38mm(L*W*H) | ||||||
Weight | 0.71Kg | ||||||
Packing | 30pcs/22.5kg/1.22CUFT | ||||||
NOTE | |||||||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation |