Bộ chuyển đổi và khuếch đại tín hiệu, Signal Conditioning Modules, The main aim of Signal Conditioning Module is to convert input signals from a primary sensor signal to unified standard ranges.
Bộ chuyển đổi và khuếch đại tín hiệu, Signal Conditioning Modules, The main aim of Signal Conditioning Module is to convert input signals from a primary sensor signal to unified standard ranges.
Showing 1–16 of 31 results
SG-770 CR 7/14 channel Surge Protector(Voltage, Current, Thermocouple, RTD, RS-485/422, RS-232, CAN bus, FRnet) (RoHS)
Micro-Processor Controlled Display Device PAX-LC-TG in small housing, for passive and active signals and with RS 232- Interface from Lorenz Messtechnik GmbH
Sensor Interface with Voltage Output LMV, Lorenz Messtechnik GmbH
SG-3071 CR Isolated DC Voltage Input/Output Module (RoHS)
SG-3081 CR Isolated DC Current Input/Output Module (RoHS)
PW-3090-24S Output Power Voltage +24 V @ 400 mA (max.) Accuracy : 2%
PW-3090-12S Output Power Voltage +12 V @ 800 mA (max.) Accuracy : 2%
PW-3090-5S Output Power Voltage +5 V @ 2000 mA (max.) Accuracy : 2%
PW-3090-15D Output Power Voltage 15 V @ 300 mA (max.) Accuracy : 2%
PW-3090-5D Output Power Voltage 5 V @ 1000 mA (max.) Accuracy : 2%
PW-3090-24S CR Output Power Voltage +24 V @ 400 mA (max.) Accuracy : 2% (RoHS)
PW-3090-12S CR Output Power Voltage +12 V @ 800 mA (max.) Accuracy : 2% (RoHS)
PW-3090-5S CR Output Power Voltage +5 V @ 2000 mA (max.) Accuracy : 2% (RoHS)
PW-3090-15D CR Output Power Voltage 15 V @ 300 mA (max.) Accuracy : 2% (RoHS)
PW-3090-4824S-10 CR ~ Available soon ~ Output Power Voltage 24.7 V @ 400 mA (max.) Accuracy : 2% (RoHS)
SG-3383 CR 3-channel DC Current Signal Splitter (Gray Cover) (RoHS)
SG-3011 CR: Isolated Thermocouple Input Module (RoHS)
SG-3011H CR: Isolated Thermocouple Input Module with High-speed Response Time (RoHS)
SG-3013 Isolated RTD Input Module
SG-3016 CR Isolated Strain Gauge Input Module (RoHS)
SG-785 CR The RS-485 pull-high/pull-low and termination resistors module (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
DN-843V-600V CR 3-channel 600 VDC Voltage Attenuator with non-isolation (RoHS)
DN-843VI-600V CR 3-channel 600 VDC Voltage Attenuator with channel to channel isolation (RoHS)
DN-843V-600V CR 3-channel 600 VDC Voltage Attenuator with non-isolation (RoHS)
Signal Conditioning Modules and normalizers represent the essential link between a great world of sensors, execution units and systems of data collection and control on the basis of computers and controllers. Being an integral part of the measuring channel they secure informational compatibility for all system.
Normalizers convert signals of direct and alternating current, current loop, thermocouples, resistive thermometers, tension sensors, resistors and potentiometers, etc. into the unified signals of standard range. For the analog signals this is usually either the ranges between 0…5 V, 0…10 V, 0…20 мА, 4…20 мА, or the current loop. For discrete signals these are TTL-level signals with a range between 0…5 V.